Zero Fossil Fuel Tutorial on building his PWM This is very good for those who need help and some guidance on building a PWM to run your Hydrogen Generator. Although this is a slightly more complicated one to build, let me say I have built 3 of these and they work very well. The plans Continue reading →
Posted under Hydrogen Cell
This post was written by Michael on December 15, 2008
Electrolyte: Water and a chemical
Used to make the water more conductive so electricity will flow through it for our hydrogen production in our hydrogen boosters. Usually the best is sodium or potassium hydroxide. Some use salt, and some use baking soda. But for longevity of the stainless steel plates you really should use sodium or potassium hydroxide, commonly know as Lye.
Posted under Engine Sensors, Hydrogen Boosters
This post was written by Michael on November 11, 2008
This question comes up a lot. There are literally thousands of models of car, and each has it’s own design. The number of oxygen sensors can vary from one to four or more. Do all of them need EFIE’s to operate properly with fuel saving devices?
Posted under Engine Sensors
This post was written by Michael on November 9, 2008
