To all my readers and friends. I have been working on my Hydrogen Homemade Generator. But I have had setbacks as I am not getting the production out of it I want. So far I have re-designed it 4 times. I will get it one of these days and put up some Videos of it. Continue reading →
Posted under Homemade Cell
This post was written by Michael on February 7, 2009
The purpose of our electronic control circuit is to lean out the air/fuel mixture from 14.7:1 to a mixture that is lean enough to prevent unacceptable amounts of NOx emissions (typically above 18:1) and 20:1 in some conditions. For our homemade hydrogen boosters or hydrogen generator cells to accomplish this we have to install electronic fuel injection enhancers along with our hydrogen generator cells. We also need to manipulate the maf or map sensors to control the amount of fuel injected.
Posted under Homemade Cell
This post was written by Michael on December 13, 2008
Electrolyte: Water and a chemical
Used to make the water more conductive so electricity will flow through it for our hydrogen production in our hydrogen boosters. Usually the best is sodium or potassium hydroxide. Some use salt, and some use baking soda. But for longevity of the stainless steel plates you really should use sodium or potassium hydroxide, commonly know as Lye.
Posted under Engine Sensors, Hydrogen Boosters
This post was written by Michael on November 11, 2008
