Hydrogen4fuel.biz See my other videos under mpgguy01 This hydrogen booster is a 5-plate design. It is made up of one stainless steel pipe for the + plate, one stainless steel screen for the plate, and three stainless steel screen dummy plates. The dummy plates are used for cooling and also produce hydrogen. I have found that hydrogen comes off the plates on the edges and sticks to the rest of plate. Using a screen increases the surface edge for the hydrogen to come off. This allows for a low amperage draw, 4 amps at most with this booster. The resistor keeps the booster from running away when the booster becomes warm. I have also found that more hydrogen is not better. This kit is designed for white vinegar as electrolyte. White vinegar does not produce the most hydrogen possible but is safer and more available than other electrolytes. The booster plates have been tightly space to work with white vinegar. This booster is made up from a radiator over flow bottle. This makes a more durable and nicer looking product over pvc designs. Temperature in the bottle is from room temp to 180 f. The biggest engine I have put this booster on is a diesel powered tree shredder at a recycling yard. The engine is a C-12 950hp. This engine hydraulically turns vertical drum, the size of cement mixer, to turn whole trees into mulch. After adding 1 booster kit the engine runs quit, smooth, no smoke, can mulch palm trees [could not mulch palm trees before], and has gone from 700 gallons a week …
Related posts:
- Mixing Water and Lye for HHO Cells
- Hydrogen Booster test #1
- Vertical Hydrogen Booster 6-23-08
- Terminology of HHO Booster Cells and Sensors
- Hydrogen Booster Install: 92 Toyota Camry Part 1
Related posts brought to you by Yet Another Related Posts Plugin.
Stumble it!
Posted under Hydrogen Boosters
This post was written by admin on June 5, 2010
See on ebay complete kit no.330297114650 See my other videos under mpgguy01