Testing Ford Sensors Part 5

IAC Valve TESTING:
1. Turn the ignition switch to the OFF position
2. Disengage the wiring harness connector from the IAC valve .
Using an ohmmeter, measure the resistance between the terminals of the valve. NOTE: Due to the diode in the solenoid, place the ohmmeter positive lead on the VPWR terminal and the negative lead on the ISC terminal.
3. If the resistance is not 7–13 ohms, replace the IAC valve.


IAC Valve Wiring


IAC Valve Wiring




IAC Valve

IAC Valve




Thats all I have. I hope it will help someone.

Be Sociable, Share!

Posted under

This post was written by admin on July 2, 2010

Leave a Comment

Name

Email

Website

Comments

CommentLuv badge

Spam Protection by WP-SpamFree

Security Code: